makéna stainless steel kalawan atomization ngabentuk téhnologi
Lapang Aplikasi
1.Permukaan pagawean tina aluminium séng paeh casting jeung beberesih permukaan casting keusik aluminium. nyemprot permukaan marmer jieunan sarta polishing. Beberesih jeung pagawean tina baja alloy tinggi casting skala permukaan oksida, blok mesin alloy aluminium sarta bagian casting paeh badag lianna, perlakuan pangaruh permukaan marmer jeung perlakuan antiskid.
2.Aluminium séng paeh casting, beberesih permukaan casting precision, roughening permukaan saméméh palapis husus, polishing semprot refined tina profil aluminium pikeun miceun garis Tonjolan permukaan, polishing semprot refined tina beungeut pipa aluminium tambaga, sarta polishing semprot refined wadahna stainless steel sarta klep.
3. Ngabersihan parabot casting tiis, kromium plating maot pikeun forging paeh jeung ban, renovate panutup pompa of supercharger mesin mobil, nguatkeun gear precision jeung spring of starter, sarta semprot polishing beungeut wadah stainless steel.
4.Aluminium séng paeh casting, kotak mesin motor, sirah silinder, carburetor, cangkang pompa bahan bakar mesin, pipa asupan, konci mobil. Beungeut profil kabayang casting tekanan low bakal cleaned tur rengse saméméh lukisan. Permukaan pagawean jeung beberesih tina tambaga aluminium stainless steel stamping bagian, investasi casting bagian stainless steel, jsb.
Parameter Téknis
| Proyék | 304 Kualitas | 430 Kualitas | |
| Komposisi kimiawi% | C | 0.08-1.0 | <0.2 |
| Si | 0.4-1.2 | <1.5 | |
| Mn | 0.35-1.2 | 0.8-1.2 | |
| S | <0.05 | <0.05 | |
| P | <0.05 | <0.05 | |
| Cr | 15-16.5 | 15-17 | |
| Ni | 5-8% | 0 | |
| Teu karasa | HRC40-50 | HRC35-50 | |
| Kapadetan | 7,00 g/cm3 | ||
| Mikrostruktur | austenit | Ferrite | |
| Penampilan | Bulat Partikel kerung = 0% Partikel kerung = 0% | ||
| Tipe | 14-18# / 16-20# / 20-25# / 25-30# / 30-40# / 40-70# / 70-140# / 140-270# | ||
| Bungkusan | Unggal ton dina Usuk anu misah sareng unggal ton dibagi kana bungkus 25KG. | ||
| Daya tahan | 27000~28000 kali | ||
| Kapadetan | 7,0 g/cm3 | ||
| Aplikasi | Ieu utamana dipaké pikeun deburring sarta pagawean permukaan aluminium paeh casting, séng alloy paeh casting jeung magnésium alloy paeh casting; permukaan pagawean casting precision, casting stainless steel sarta blok bentang; pembuatan kaca, beberesih permukaan sarta sagala rupa pretreatment of kapang casting paeh. | ||
Aplikasi
| TIPE | Disarankeun wengkuan pamakéan |
| 14-18# | Ngabersihan alat casting tiis, kromium plating maot keur forging ban, renovate panutup pompa of supercharger mesin mobil, nguatkeun gear precision jeung spring of starter, sarta semprot polishing beungeut wadahna stainless steel. |
| 16-20# | Aluminium séng paeh casting, beberesih permukaan casting precision, roughening permukaan saméméh palapis husus, polishing semprot refined tina profil aluminium pikeun miceun garis Tonjolan permukaan, polishing semprot refined tina beungeut pipa aluminium tambaga, sarta polishing semprot refined wadahna stainless steel sarta klep. |
| 20-25# | Aluminium séng paeh casting, kotak mesin motor, sirah silinder, carburetor, cangkang pompa bahan bakar mesin, pipa asupan, konci mobil. Beungeut profil kabayang casting tekanan low bakal cleaned tur rengse saméméh lukisan. Permukaan pagawean jeung beberesih tina tambaga aluminium stainless steel stamping bagian, investasi casting bagian stainless steel, jsb. |
| 25-30# | Aluminium séng maot casting permukaan pagawean, keusik aluminium casting beberesih permukaan. Beungeut marmer jieunan disemprot sareng digosok. |
| 30-40# | Salian fungsi wg40, beungeut casting stainless steel lemes jeung rupa. Descaling perlakuan forgings baja alloy. Pangaruh pagawean permukaan marmer jieunan sareng perlakuan antiskid. |
| 40-70# | Kulit oksida permukaan tuang baja alloy tinggi, blok mesin alloy aluminium sareng bagian casting paeh ageung sanésna beberesih sareng pagawean, perlakuan pangaruh permukaan marmer sareng perlakuan anti skid. |
| 70-140# 140-270# | Beungeut casting baja kabentuk ieu deaerated saméméh palapis, hub kabayang mobil, perlakuan cangkang mesin, produk granit jeung léngkah marmer roughening jeung perlakuan anti skid. |
Granularity
| LayarNO. | Ukuran layar mm | In | 14-18 | 16-20 | 20-25 | 25-30 | 30-40 | 40-70 | 70-140 | 140-270 |
| 14 | 1.4 | 0,0555 |
|
|
|
|
|
|
|
|
| 16 | 1.18 | 0,0469 |
|
|
|
|
|
|
|
|
| 18 | 1 | 0,0394 |
|
|
|
|
|
|
|
|
| 20 | 0.85 | 0.0331 |
|
|
|
|
|
|
|
|
| 25 | 0.71 | 0,0278 |
|
|
|
|
|
|
|
|
| 30 | 0.6 | 0,0234 |
|
|
|
|
|
|
|
|
| 35 | 0.5 | 0,0197 |
|
|
|
|
|
|
|
|
| 40 | 0.425 | 0,0165 |
|
|
|
|
|
|
|
|
| 50 | 0.3 | 0.0117 |
|
|
|
|
|
|
|
|
| 70 | 0.212 | 0.0083 |
|
|
|
|
|
|
|
|
| 100 | 0.15 | 0,0059 |
|
|
|
|
|
|
|
|
| 140 | 0.106 | 0,0041 |
|
|
|
|
|
|
|
|
| 270 | <0.05 | <0.0019 |
|
|
|
|
|
|
|
|
Kategori produk
